Besides, LED lights can provide the best color texture compared to CFL or Halogen lights. Usually, light-emitting diodes have all the light frequencies that bright daylight has. So, it can be the best lighting solution for the modern world. To get the best solutions for the lighting of your interior, exterior, outdoor areas, factories, or commercial houses.

The Basics Of Led Light, And How Do They Work?

As you know LED stands for the light emitting diode. The old filament bulbs are more than 90 percent dimmer than LED lights. The technical explanation is critical, but you can get a basic idea about these bulbs.
LED is a diode that uses a silicon chip which is a semiconductor. These semiconductors can pass electrons in an even direction. During the passing of electrons through the semiconductors, it emits light, and it can convert the entire energy into light. Almost 98 percent of energy converts to light, and 2 percent turns into heat. Therefore, you will get maximum energy conversion to light through this technology.

Easy Led Explanation :

Each unit of LED light is itself a semiconductor chip and can convert AC (alternating current) frequency to DC (direct current). If you connect it to an AC line, you will get light as well as DC frequency. To get a complete conversion of energy to light, you can use a smooth DC. So, every LED light has a circuit (SMPS) board to make AC voltage to DC voltage.

The Operating Voltage And Details:

As everybody knows the mains of AC power contain 220 to 230 volts of AC. But, the LED unit operating voltage is 3.0v DC to 4.5v DC. The SMPS (Switched Mode Power Supply) gives smooth voltage and power supply to the LED units. It converts 220v to a required voltage that the LED unit requires. So, the cost of electricity is very less compared to all its predecessors. Filament, florescent, halogen, and other varieties of bulbs cannot compete with these bulbs in their efficiency. The longevity of LED is very high. Usually, the average use of LED lights can stay more than 10 years. It depends on the power supply and efficiency of SMPS and the quality of production. In a word, LED bulbs are the game changer for the next world of technological development.

How Can You Use Led Lights?

After the invention of LED bulbs in the year of 1968, it was used in various sectors of the electronics world. After 1990, it came in the form of an LED bulb and gradually developed its light-emitting capability and efficiency. The research is going on. Along with the technological development of LED bulbs, the uses of them has reached their top. People are using them for enlightening the interiors, exteriors, outdoor areas, and garden areas, as well as enlightening all commercial places as well as the factories.
LED stands for the light-emitting diode. LED lighting products produce light up to 90% more efficiently than incandescent light bulbs. How do they work? An electrical current passes through a microchip, which illuminates the tiny light sources we call LEDs and the result is visible light. The heat LEDs produced are absorbed into a heat sink.

Life Of Led Lighting Products:


The usefulness of LED lights is increasing day by day. The life of LED is typically defined as its light-dimming factor. CFL, cathode tube ray (tubular lights), mercury lights, and filament lights get burnt out over time. However, LED lights do not get burnt out over time. You will experience light depreciation over time. Usually, an LED light is kept aside when the light depreciation reaches by 30% or more.

Light Fixtures For Specific Needs

Today, a lot of varieties have been noticed in the world of LED light technology. Along with various types of light fixers, you will get the best quality LED UFO high bay lights for the interiors of residential houses, commercial houses or factories, and other places. LED lights with different kinds of fixtures, come to the market to fit with outdoor areas like gardens, passageways, pathways, front doors, street lights, and more. Some LED lights come with variegated colors or specific light-emitting capabilities. There is nothing to say about the modern generation Smart LED technology that you can regulate with the mobile application, Google, Amazon or SIRI commands.
The lights also come with dimmer switches. They consume less power compared to the bright mode. So, the facility of LED lights is numerous.

Specialties Of Led Lights:

You have heard about the longevity and high-lumen power of LED lights. What more you can get from these bulbs? The research says that LED lights can give almost all light frequencies of bright sunlight (VIBGYOR). So, you can easily capture flawless images on any camera you use. No color deficiency will be noticed over there. So, all mobile photo-capturing guys and professional photographers use LED lights for this purpose.
Easy waterproofing functionality. LED light units are very thin. The SMPS can also be made thin by using modern technology. You can keep SMPS in different locations as well. So, the light can easily be made waterproof sealing the light with rubberized sealants or some special glues. This feature helps use them outdoors flawlessly. Without the fear of damage in rain waters. Any splash of water will not damage these lights. With this special feature, you can easily use these lights underwater.

Closing Words:

LED lights can work in high-temperature variations without any depletion of light. So, this lighting technology is the game changer of the modern world wherever you want to use it. Whether you use indoors, outdoors, or high bay factories, these lights are the best among all their predecessors. If you want the best quality LED lights of any type directly from the house of the manufacturers, you can contact Atara Lights. You will get all types of indoor and LED outdoor area lights here.