How a Dryer Heat Exchanger Works


Posted January 26, 2022 by furnacehousesaz

The exhaust air of the dryer goes through a radiator assembly before being vented to the outside.

 
A dryer heat exchanger is an efficient and effective way to recover the energy that is lost in the dryer vent. This process can also be applied to commercial and industrial applications. Before exhausting the air from a dryer, it would pass through a heat exchanger. The outside air would then be sucked into the heat exchanger and supplied to the home. As a result, the heated air from the dryer can help to reduce energy costs.

The exhaust air of the dryer goes through a radiator assembly before being vented to the outside. Control hardware in the dryer monitors the temperature on the input side and switches on the fan when the temperature rises. This allows the air to flow through the radiator and pick up heat energy from the exhaust gas. This is an excellent way to improve the efficiency of the heat exchanger. Here are some of the ways it works. The first step is to determine the amount of water the dryer produces, and then figure out what to do to avoid it.

The second step in the process of reducing energy costs is installing a heat exchanger. It is a simple mechanism that uses two sets of pipes. The output side of the dryer's exhaust gas passes through a radiator assembly. This allows the air to pick up the heat energy from the exhaust gas. This is a great way to save on your HVAC energy bill. As the exhaust gas leaves the dryer, the heater must be able to absorb most of the water, thereby reducing the need to run the heating system.

The external walls of the dryer heat exchanger are made of 14 twinwall polycarbonate sheets that are spaced apart by spacers. The room air and the drying air are able to pass through the spaces between the sheets. In addition to the twinwall sheets, the outer edges of the stack have inlet and exit air delivery boxes. The smaller boxes are the inlet and outlet for the dryer's air, and the large box is the room inlet box without the fan.

The heat exchanger is an integral part of the dryer and works with the other parts of the dryer to produce warm air. The dryer's exhaust air passes through the radiator and is vented outside the house. The thermostat control hardware is designed to monitor the temperature of the exhaust gas and turns on the fan when the air reaches a higher temperature. This process will also increase the efficiency of the dryer. During this process, the heat exchanger will also help to reduce the energy costs of the appliance.

The heat exchanger of a dryer is connected directly to the exterior of the dryer. The heat exchanger can be retrofitted into an existing dryer or can be included as a component part of the dryer itself. In some cases, it may be retrofitted into an existing grain-dryer. But if you have a new dryer, you can install the heat-exchanger as part of the new system. A dryer heat exchanger is a very effective method of heating and cooling the home.
https://www.forwon.com/applications/air-dryer-series-bphe/
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By furnacehousesaz
Country China
Categories Accounting , Advertising , Aerospace
Tags bphe , brazed plate heat exchanger , plate heat exchanger
Last Updated January 26, 2022