One of the common failures with any Fadal spindle is the drawbar. The belleville springs expand and collapse each time the tool is removed from and replaced in the spindle taper, thus you have moving Fadal parts under great pressure, so failure is imminent. In fact, we recommend that the belville springs be replaced categorically during each year’s annual preventative maintenance cycle and that the drawforce pressure (pressure holding the tool in the taper) is correct for the drawbar you have installed.

If you do not have a drawforce gauge, ITSCNC offers and repairs them for technicians or anyone who is interested in the regular health of their spindle. We are one-stop solution for Drawbar Parts for Fadal CNC Machines

It doesn’t take that much effort to do this. It’s worth it. A simple routine drawbar inspection will likely save you a lot of time, money and aggravation in the long run.

Determining a Locking or Non‐Locking Drawbar
To the right is a guide you can use to determine if you have a locking or non locking drawbar. Specifically, look at the knockout caps shown beneath the arrows. The one on the left is a locking style and on the right is the non-locking style. You can easily see the knockout caps if you remove the head cover and look down the centre of your spindle drive pulley.

Drawbar Repair and Preventative Maintenance
Neglecting your fadal drawbar will result in slowly degrading part quality and eventual non-operation of your spindle. In a worst-case scenario, it can lead to catastrophic failure, with damage costs climbing into the five-figures (not including unplanned downtime) and can put your staff at serious risk.

Drawbar Parts for Fadal CNC Machines
We'll help you properly diagnose your problem so you can stop buying Drawbars you don't need! ITSCNC carries excellent Fadal Drawbar Assembly & Parts. Our selection of machine equipment makes certain that our brand sells the best Drawbar Assembly and Parts.

We offers a wide variety of parts designed to fit your Fadal Seal Face Piston Seal Retainer, Silicon Carbide, Coolant Thru Seal Kit, drawbar cylinder standard assembly, Drawbar Floater, Non Coolant Piston Rod, Drawbar Floater, Spider Locking Drawbar, Pilot Locking Drawbar, etc.

Each of the Fadal Drawbar Assembly and Parts comes with an instruction manual containing the safety instructions to avoid any kind of malfunctioning or personal injuries. The first step of any Fadal parts installation is to cut off the electricity supply; one must disconnect all power supply to the machine before adding any component.

For more information about our fadal parts and repair services, please go through our website or call us at 1-800-342-3475.