Better Electrical Inspection for You

Operational staff in the production of inspection of an item of electrical equipment must know what to look for and what signs are not typical for the normal operation of equipment. In this article we consider the basic rules of inspection, when it is necessary to perform inspections, as well as features of the inspection of the main elements of electrical equipment.

Inspection of electrical equipment is performed by personnel who have received appropriate training in occupational safety, fire safety , as well as knowledgeable equipment maintenance instructions and other regulatory documents. For inspection of electrical installations, staff must have a group of III electrical safety .

As a rule, inspection of electrical installations with permanent staff is carried out at least twice a day. If there are no permanent attendants at the substation, the inspection is carried out once a day.

Periodic inspection of the electrical equipment of the substation is carried out along the approved route. That is, the staff inspects the equipment in strict sequence, moving through the territory of the power facility along established routes. For the Electrical repairs in gawler now you can have the perfect option available.

In addition to scheduled inspections of the equipment, so-called extraordinary inspections are carried out. Additional or extraordinary inspections are performed in the following cases:

Under adverse weather conditions: during fog, during sleet, rain, storm, pollution, ice;

After a thunderstorm. In this case, the equipment of open switchgears is inspected, in particular, arresters and voltage limiters for work during a thunderstorm, according to the installed response recorders;
In case of emergency. For example, after automatic shutdown of the equipment, the first thing that should be done is to inspect the equipment that has been turned off for damage and other remarks in the work (oil release, switch not disconnected, background noise, burning smell, etc.);

At night to detect heating contact connections, discharges and coronation equipment. In this case, the inspection is carried out at least twice a month at night, mainly in wet weather, for example, after rain or in heavy fog.

The results of the inspection of the equipment are recorded in the operational documentation of the electrical installation. The staff after the production of the inspection of the equipment makes an appropriate entry in the operational log and reports the results to the higher-level operating personnel - the dispatcher on duty.

If during the production of the inspection of the equipment were found any comments, defects, then you need to write about this in the operational log, as well as in the log of equipment defects. After that, the staff on duty reports the detected comments not only to the dispatcher, but also to the senior management (engineering and technical personnel of the enterprise) for planning work to eliminate the equipment malfunctions.

About the Company: K. Retelsdorf Electrical Service offers the best approaches now for quality electrical associations and advice and that is the reason that the affiliation is getting a charge out of monster ubiquity from every last one of the corners.