In order to remove the shower faucet head, you must first unscrew the escutcheon plate. This plate covers the hole that leads to the valve body. It must be removed in order to install the new handle. After unscrewing the escutcheon plate, you should wrap the faucet stem in Teflon tape.


Clean the aerator

You can also clean the aerator assembly by using a small stiff brush and lime-dissolving solution. If this does not work, you may have to take the plumbing fixture apart to clean it thoroughly. If you cannot remove the entire faucet head, you can clean it with a bag filled with vinegar. You can hold the bag with a rubber band to prevent it from moving around.

Use a wrench

The next step is to remove the screws that hold the handles to the stem. In some cases, the handles may be stuck and need to be removed. If the handle is stuck, you should use a wrench to remove it. Remember that a new handle should have the same number of ribs and stem depth as the one you removed.


You should also place a small container under the faucet spout to catch any loose screws. This way, you will not have to worry about losing these tiny pieces of hardware. Instead, you will be saving yourself a trip to the hardware store. Just make sure to get a piece of tape that fits into the threads.

Once you've got the handle off, you can remove the rest of the handle. This is an easy task, but you may encounter problems if the handle is stuck in calcium salts. If this is the case, use a flat head screwdriver or an Allen wrench to remove it.


Use a soft-bristle brush

Depending on the type of shower faucet head you have, you might have to disassemble the sink sprayer first. This will allow you to access the valve and clean it properly. You can also use a soft-bristle brush to clean the screen. After the cleaning process, you can put everything back together.

Once you've removed the retaining clip and the nut https://www.nivito.ca/ that holds the cartridge in place, you can replace it with a new one. Most cartridges are secured with a twist-on nut or a clip. To install a new cartridge, you can take it to a hardware store and get the exact match for your faucet. If you want to replace the valve body, you can contact a plumber.


Another problem you might encounter with your shower Nivito
is that the water is leaking out of the head. It's likely that there's a problem with the connecting nut. This could be caused by mineral deposits or hard water. If you're not sure, try soaking the head in white vinegar. This should soften the mineral deposits and make it possible for water to flow.