Introduction to the construction plan of steel structure warehouses.

1. Steel structure installation procedure

steel column installation → inter-column support installation → steel crane beam temporary installation → roof beam, roof support → steel crane beam, etc. correction and fixation → maintenance structure installation, the installation process diagram is as follows:

2. Steel column installation

(1) Due to the heavy weight and long length of the steel column, it cannot be manufactured and transported at one time. Therefore, the method of segmented production and on-site assembly as a whole is used for hoisting. It is planned to divide the steel column into two sections. The steel column is transported to the site in two sections, the lower lattice part and the upper H-shaped steel column. The weight of the steel column is about 6 tons, and the height in place is about 17 meters. A 50-ton truck crane can meet the hoisting needs, and a 25-ton truck crane is used for lifting.

(2), the hoisting adopts a single machine rotary hoisting. Before lifting, padded wooden squares at the position of the steel column toe board to prevent the steel column from damaging the toe board during the lifting process. When lifting the steel column, the crane should hook up while turning the arm to make the steel column vertically off the ground and put the column into the cup.

PTH has over 20 years of experience in this industry, and can provide full services to customers’ requirements covering design, manufacturing, logistic, installation, and after sales service.

With the fast growing of manufacturing industry, large steel structure is very much in demand. The unique advantages are high strength, capable of large span, environmental, seismic resistance etc. Its common applications are factory, warehouses, public constructions and other special application.

For details, please consult: https://www.pthhouse.com/product/steel-structure-warehouse-solutions/steel-structure-warehouse.html