Crypto Mining Immersion Cooling with InnoChill™: Cut Costs & Extend Rig Life
Lower cooling costs and extend GPU/ASIC life with InnoChill™ immersion cooling fluid for crypto mining. High dielectric strength, great thermal performance. Get a quote.
Why InnoChill™ Is Ideal for Cryptocurrency MiningCrypto mining farms run GPUs/ASICs at sustained high load—generating constant heat that throttles performance and shortens hardware life. InnoChill™ Immersion Cooling Fluid offers:
High thermal performance: Typical thermal conductivity 0.145–0.155 W/m·K to quickly absorb and dissipate heat under continuous loads.
Electrical safety: Dielectric strength >40 kV/mm helps protect boards and connectors even in dense tank layouts.
Lower total cost: Priced competitively vs. specialty fluorinated fluids and engineered for long service life to reduce fluid replacement and maintenance.
Sustainability-minded choice: Non-fluorinated formulation options available.
Learn more about the fluid: InnoChill Immersion Cooling Fluid
See related deployments: Use Cases: AI/HPC • Use Cases: Crypto Mining
Key Benefits for Mining Operations
Cut Cooling Opex: Lower $/L and efficient heat removal help reduce power draw from air handlers and CRAC/CRAH.
Extend Hardware Life: Stable, uniform temperatures minimize thermal cycling stress on GPUs/ASICs, VRMs, and memory.
Densify Without Throttling: Keep clocks high even in compact tanks and racks.
Simplify Maintenance: Long fluid life means fewer swaps and less downtime.
InnoChill™ vs Common Alternatives (Indicative)
Parameter InnoChill™ 3M Fluorinert™* Mineral Oil Engineered Fluids EC-12
Thermal Conductivity (W/m·K) 0.145–0.155 ~0.060 ~0.130 ~0.130
Dielectric Strength (kV/mm) >40 >35 >20 >20
Typical Service Life (years) 10+ 5–7 5–7 3–5
GWP (relative) Low (non-fluorinated) Very high (PFC-based) Low–Moderate Low–Moderate
Typical Price (per gal) Value-priced Premium Low Mid–High
*Fluorinert™ is a 3M trademark. Prices and values are indicative and vary by region, grade, and supplier.
Quick Implementation Tips
Single-phase immersion: Recommended for mining (simpler, safer).
Fill ratio: Typically 70–85% of tank volume to cover tall cards and risers.
Materials compatibility: Use sealed fans (or remove), avoid PVC; prefer PTFE, PBT, PPS, stainless steel, anodized aluminum, EPDM/NBR seals.
Heat rejection: Pair with dry coolers or fluid-to-water HX loops.
Monitoring: Track fluid conductivity, particulates, and temperature deltas across the loop.
Get setup guidance: Immersion Cooling Setup Guide
Download docs: Technical Data Sheet • Safety Data Sheet
FAQ
Will immersion damage my GPUs/ASICs?
Not when done correctly with a proper dielectric fluid, compatible materials, and good filtration. Many miners report lower failure rates vs. air.
Can I reuse the fluid when upgrading rigs?
Yes—filter and re-qualify (conductivity/particulates) before refilling.
How much can immersion cut energy use?
Savings vary by climate and system design, but miners often reduce cooling power substantially by eliminating/reducing chillers and high-pressure air.
See more answers: Immersion Cooling FAQ
Call to Action
Cut your cooling costs and extend hardware life—Request an InnoChill™ Quote today.
Contact Information
InnoChill
\ud83d\udce7 Email: [email protected]
\ud83d\udcde Phone / WeChat: +86-135-4070-2776
\ud83c\udf10 Website: www.innochill.com
- Contact Email
- [email protected]
- Issued By
- INNOCHILL
- Country
- China
- Categories
- Business · Industry · Internet
- Last Updated
- August 18, 2025
Disclaimer: This press release was submitted by a registered PRFree contributor and has not been verified or endorsed by PRFree. PRFree assumes no responsibility or liability for its accuracy, content, legality, or reliability. The contact email for this release can be viewed here. See our Disclaimer.