Specialityvalve is the greatest Thermal Safety Valve Manufacturer in India. A thermal safety valve implies the cases when the thermal expansion of a liquid would create excessive pressure in a closed system. When liquid heat up it expands but not much as gas. Even if the temperature increases the change in the liquid is not large by a percent.
It is designed to protect the pump and operator’s circumstances when the pump is running and discharge outlets have been closed. In this situation, energy is observed by the pump which is converted into heat causing the pump water to heat up.
These factors lead to thermal valves with some unique properties. They do not need to be very large since the volume increase will be relatively small. Usually, they will have an inlet diameter that is no larger than 1. The liquid is also not safe sometimes vents directly to the environment in the case of petroleum products or acids.
Since these valves are placed in areas that have no access to a control system. It is uncommon to find valves controlled by the temperature sensor or solenoid type of system.
Thermal Safety Valve Manufacturer in India has installed the thermal safety valve in the cold-water inlet of the safety heat exchanger. This type of installation protects the valve from impurities due to limescale deposits or similar effects. Install the valve in the warm water outlet only in the case of older boiler models where the protection is provided by the integrated portable water heater without the temperature control.
Features of thermal safety valve
Guarantee for worldwide applicable
Blowdown ring may provide the best for the applications
It serves for the protection of equipment
Advantages of thermal safety valve
It has low fluid resistance
Provide superior sealing performance
Wide application range
Disadvantages of thermal safety valve
It opens or closes slowly
It prone to scratches
Body material: Cast iron, cast steel (WCB, WCC, LCC, LCB, WC6, WC9), Ductile iron, carbon steel, stainless steel (SS316, SS304, CF8).
Class: 150 - 2500, PN10-PN450
Size: ½” - 40”
Ends: Socket weld butt weld, flanged, threaded.
Specialityvalve is a leading Thermal Safety Valve Manufacturer in India. It offers the best quality valve to our valuable customers. It uses cutting-edge machinery and is also known for its flawless design and easy installation.
https://www.specialityvalve.com/product-category/thermal-safety-valve/
Pressure safety valve manufacturer in India:
Specialityvalve is one of the largest Pressure Safety Valve Manufacturer in India. A pressure safety valve is used to release gases or liquids. The purpose of a safety valve is to be the last line of defense in protecting equipment, the environment, and most important personnel. It can be used as a final measure to prevent accidents rather than consistently maintaining pressure. These valves are heavily regulated and must meet ASME code requirements.
The pressure safety valve must be able to operate at any time in any condition. The operation cannot rely on a power source so it is operable in the case of a power outage. The factors that need to consider when selecting a pressure safety valve are set to pressure, temperature, back pressure, connection size, and required capacity.
A safety Valve is a pressure relief valve that releases a substance from a boiler, pressure vessel, or another system. Their primary role is safety and is used for boiler overpressure protection, and process operation to prevent product damage due to excess pressure. The primary function is to protect life, the environment, and property against the failure to control system pressures, and last it offers reducing system pressure before total failure.
Types of pressure safety valve
Spring-loaded pressure safety valves
Pilot-operated pressure safety valves
Full lift pressure safety valve
Low lift pressure safety valve
Benefits of pressure safety valve
Life protection.
forming to open and release extra pressure from machinery.
Prevent fluid release
Materials: Cast iron, Ductile Iron, WCB, SS304, SS316, CF8, CF8M, WC6, WCC, LCB, LCC.
Class: 150 to 2500.
Nominal Pressure: PN10 to PN450.
Ends- Butt weld, socket weld,Flanged,Threaded
Size: ½” to 40”.
Specialityvalve is one of the best Pressure Safety Valve Manufacturer in India and has one of the popular products which are available in a variety of sizes and can also be customized to meet the needs of our customers. All the products are tested according to requirements and standards.
https://www.specialityvalve.com/product-category/pressure-safety-valve/