With the diversification of the raw paddy and the processing methods, more and more broken rice will be generated during rice processing. How to control the broken rice rate is the key to increase rice processing mill profit, as well as the key to measuring the rice machinery quality and the technical level.After learning how to use the rice mill production line https://www.shellermachine.com/rice-mill-production-line , then also need to know how to maintain the machines to guarantee its long-time service.
1) Rice destoner machine https://www.shellermachine.com/rice-destoner-machine : The screen should be inspected and cleaned every shift to prevent clogging of the screen holes. The screen should be replaced timely if damaged. Also need to clean the grains and fine sand in hood regularly.
2) rice huller: When the fast roller rubber layer is worn to about half, the fast and slow rollers can be used interchangeably. When the rubber layer of the rubber roller wears out and the iron core is exposed, new rubber rollers should be replaced. The two rollers should be replaced at the same time, and the surface of the rubber roller should be kept flat.
3) Paddy rice separator: Check the lubrication condition of the transmission part, and add lubricating oil (grease) in time.
4) rice whitener: The chaff suction fan impeller and air duct should be cleaned once every two months.
5)Common maintenance of each machine:
1. Maintain one time every 3 months and overhaul one time a year.
2. Lubricating oil should be added to each transmission part regularly.
3. The bearing is generally replaced with grease one time every 6 months.
4. Where the bearing is overheated, the grease is hardened, the oil color becomes dark, or the oil surface has water droplets and dirt, must replace the grease immediately.
When finding the machine vibrates violently, should shut down the machine immediately for an inspection.