Sylmar, CA (June 19, 2022) - Grease trap cleaning continues to be one of the messiest problems with drains. A grease trap also known as agrees interceptor in a sink is a gadget attached to the plumbing within the pipe to store the grease that accumulates after being watched down in the drain. Building up over time these oil and fatty particles are allowed to build up too heavily in the lines that eventually become clogged. When the grease trap is full it allows the grease to enter the sewer system. It is likely to create a build-up that will eventually result in a clock in the system.
When there is a need for cleaning the grease trap the lid is gently detached to make sure that no damage is done to the gasket. If the gasket is damaged in the process then the expense will be more. It is important to inspect the different parts of a grease trap before removing and replacing them during the cleaning process. Restaurant grease trap cleaning should have complete knowledge about where the components are located and how to install them before putting them back in the right places. Usually, a wooden stick is inserted to measure towards the bottom of the grease trap moving the stick slightly helps in gauging the level of grease inside. Services from https://www.recyclingusedcookingoil.com/grease-trap-cleaning-and-pumping-services/ help provide a guide on how much debris is present inside the trap.
Removing standing water from the tank of the grease trap by Hollywood grease trap cleaning service is necessary. One can also be considered to store the water in a larger bucket or crash bean and pour it back into the drain after collecting the waste. Removing the waste from the grease trap with a bucket is recommended. The bucket is scoped into the trap to bring out the solidified waste. Placing the wastewater in a tight container or heavy-duty trash bag is helpful. Water and soap can be used for cleaning the lid and sides of the trap. Some prefer to use a steel pot scrubber for removing access waste and odor. Flushing the screen and parts with water is effective for removing soap and debris. After cleaning the parts it is important to replace the parts appropriately so that the grease trap can function effectively.
Commercial kitchens looking for a dependable grease trap pumping service, visit https://www.recyclingusedcookingoil.com/grease-trap-cleaning-and-pumping-services/
13151 San Fernando Rd Sylmar, CA 91342
5241 Schirlls St, Las Vegas, NV 89118
After Hours: 818.381.1941
Email: [email protected]