Welding is a difficult thing and it is very important to wear the proper gear when welding anything. Welding is professional and very important for anyone who needs to get any thing in iron welded. Several welders lose their eyesight because the sparks and the rays destroy the eyesight. When doing tig welding it is important to have the proper equipment as well as the proper welding safety gear.

The safety equipment of tig welding includes hole-free insulating gloves, body protector, and welding helmet with a shade for protection against the strong rays of welding. Safety glasses are also a must with the protective helmet to protect the eyes from the harmful rays. The clothes are made up of flame resistant material, which is important to avoid any kind of fire that may occur due to the sparks that arise.

When doing tig welding it is very important to make sure that the tip of the nozzle is well placed, the pin in the nozzle should be positioned at the proper angle, of it is too inside the flame would be different, similarly if the pin is sticking out too much it would cause to be harmful if the welding is on a small part of iron. An expert and professional welder to avoid any kind of problems should check the proper position. Welders who have faced issues have all faced problems with burn and fire or with the problem in their eye sight.

It is not at all advisable to do mig welding without an auto darkening helmet. It is important to make sure that everything that is being handled properly should be managed in such a way that no harm is done to the welder. There are several welders who cannot afford to buy a good helmet for tig welding but it is very important and one should not risk their eyes for welding. Along with these few basic things needed for mig welding there are a few issues that usually arise.

In case of the following things, it is a good idea to discontinue welding immediately. In case of the weld deposit getting heavily oxidized or if the wire feed is irregular. Also, in case there is a chance of burn back or if burn back occurs or if porosity occurs. The other times when you discontinue would when if the arc is unstable or if the arc starting is difficult as well.

Such problems occur when something is wrong with the tig welding or mig welding kit and there are chances that a huge problem might occur, to avoid any such issue, it is a good idea to keep a proper check of the things before starting tig welding or mig welding to do things safely and avoid any kind of damage or fire that may cause a lot of harm. The welding gear is slightly expensive but it is for permanent use and professionals should have their own gear in case they are not provided by their hirer to avoid any kind of damage to their own body and to their surroundings.
You can choose to do a mig welding http://www.proweldwelding.com.au/ or a tig welding http://www.proweldwelding.com.au/ job with the right tools.