Intelligent metering pump in the application of dosing liquid


Posted October 15, 2021 by FEISHENG

The technical advantages of Guangzhou Ascend FSH-SK Intelligent metering pump system in batching and liquid addition are reflected in the following aspects.

 
FSH-SK Intelligent metering pump system

The technical advantages of Guangzhou Ascend FSH-SK Intelligent metering pump system in batching and liquid addition are reflected in the following aspects.

1. the number of liquid addition of Intelligent metering pump system can be measured.
2. high precision (within 0.3%), high consistency and uniformity.

3. the dosing volume of the Intelligent metering pump system from μL level to mL level to L level.

4. fast speed, high liquid addition efficiency and compatibility of the Intelligent metering pump system.

5. single-channel, dual-channel and multi-channel combinations of Intelligent metering pump systems are available, and different liquids can be added independently at the same time.

6. digital adjustment of liquid quantity, simple and intuitive operation.

7. Intelligent metering pump system can be integrated with the host computer, closed-loop synchronization, to achieve the online input quantity setting and change.

8. Intelligent metering pump system with high return on investment has a segment, service life of 5-10 years or more, with very low maintenance costs.

Successful case 1: well-known enterprises in the lithium industry Input additives at the front-end dosing

Requirement: The solvent required for positive and negative battery slurry (positive GSN, negative DI water), the input quantity varies from a dozen g to several tens of kg, is delivered to the positive and negative mixer in turn, with a precision requirement of 1% to 3%.

Original solution: Manual measurement and weighing, and then manually put into the positive and negative mixer in turn.

Disadvantages.

1, manual weighing, the accuracy is not high, affecting the product qualification rate and performance.

2, manual multiple weighing is easy to forget, resulting in duplication or omission of adding material.

3, manual measurement weighing a few kilograms to dozens of kilograms, and weighing requires manual input into the mixer, repeated consumption is relatively large.

Solution: Adopt Ascend's special precision ceramic FSH-SK10 Intelligent metering pump system, connect the pipeline directly to the mixer to replace the manual measurement of ingredients.

Advantages.

1, intelligent control of the added amount, no manual measurement, higher precision, to meet the technical requirements of customers.

2, Intelligent metering pump system can measure the number of dosing times, avoiding repeated dosing or missing dosing.

3, direct pipeline connection, reagents can be directly transported to the mixer through the pipeline, saving time and personnel workload.

4, Multi-channel combination, different liquids can be added independently at the same time, saving dosing time.

Successful case 2: A well-known material supplier electrolyte preparation

A well-known domestic material company needs to add different solvents to the electrolyte preparation. There are more than a dozen formulations of electrolyte, and the type and dosage of added solvents are different in each formulation.

Original solution: Select the solvents to be added in the corresponding formulations, check the dosage, and put them into the ingredients separately after manual measurement and weighing.

Disadvantages.

1, more types of recipes, more types of additives and dose composition, manual measurement is easy to make mistakes, resulting in a lower qualification rate.

2, the additives used are chemical solvents, there is a certain volatile and corrosive, prolonged exposure to the human body has certain hazards.

3, the cost of additives used is high, manual measurement accuracy deviation, a long time small measurement of waste, resulting in increased product costs.

Solution:Adopt Ascend special precision ceramic FSH-SK10 Intelligent metering pump system, multi-channel combination to measure different solvents respectively, instead of manual metering ingredients.

Advantages.

1, Through the intelligent control system, different solvents are measured and added separately to avoid duplication or omission.

2, The metering pump is acid and alkali resistant, corrosion resistant, the solvent is transported through the pipeline, avoiding manual contact, reducing the harm to human body.

3, 0.3% high precision metering, avoiding waste of raw materials and saving customers' cost.

Guangzhou Ascend Precision Equipment Co., Ltd. is a high-tech enterprise specializing in fluid precision control systems and solutions. The company has extremely rich experience in the field of precision fluid dispensing, filling, dispensing, spraying and automation design and manufacturing, and is the industry leading company in micro fluid control system. We have provided industry-leading system solutions for many high-tech industries in China and Asia, such as new energy lithium, bio-chips, pharmaceuticals, medical devices, and semiconductors, creating more value for our customers with our technology.

Contact
Tel : 0086-020-22939609

Phone : +86-15625008015

What’app : 15625008015

Email : [email protected]

Addree : 2nd Floor, Building 10, No. 128, Donghuan Road, Donghuan Street, Panyu District, Guangzhou
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By Guangzhou Ascend Precision Machinery Co.,Ltd.
Phone +86-15625008015
Country China
Categories Blogging
Last Updated October 15, 2021